Cisco ISDN BRI S/T WIC for Cisco 1700, 1800, 2600, 2800, 3600, 3700, & 3800
CISCO/라우터 & 라우팅 시스템 2007/05/05 21:12Offering a single ISDN BRI S/T interface, this WIC may require an external Network Termination 1 (NT1), depending on the region of the world. The WIC inserts into a mixed-media network module or directly into the WIC slot on the Cisco 1600, 1700, 1800, 2600, 2800, 3600, 3700, 3800 Series chassis. The ability to add BRI connectivity through a WIC enables administrators to maximize valuable slot space while providing additional connectivity options, such as Ethernet, on the same module.
Figure 1. Cisco WIC 1B-S/T-V3 WAN Interface Card
FEATURES
• One ISDN BRI port (S/T interface, requires external NT1)
• Utilizes an RJ-45 connector
• Supported Onboard, NM-1FE2W-V2, NM-1FE1R2W, NM-2FE2W-V2 and NM-2W
BENEFITS OF AN INTEGRATED, FULLY MANAGED SOLUTION
• Fewer devices and cables to deploy and manage
• Remote and local configuration, monitoring, and troubleshooting via the Cisco IOS® Software CLI and Simple Network Management Protocol (SNMP)
• Flexibility and investment protection
• Single-vendor support
• Enhanced reliability
• Physical space savings
FLEXIBILITY AND INVESTMENT PROTECTION
ENHANCED RELIABILITY
CONSISTENCY WITH WIC-1B-S/T
WIC-1B-S/T |
WIC-1B-S/T-V3 |
One ISDN BRI port (S/T interface, requires external NT1) |
One ISDN BRI port (S/T interface, requires external NT1) |
RJ-45 connector |
RJ-45 connector |
Supported on Cisco 1600, 1700, 2600, 3600, and series |
Supported on Cisco 1700, 1800, 2600, 2800, 3660, 3700 and 3800 series (see tables below) |
Cannot be used with Cisco 1603 or 1604 base units |
Cannot be used with Cisco 1603 or 1604 base units |
Does not support hot swapping; however, no hardware damage will occur if it is swapped while power is on |
Does not support hot swapping; however, no hardware damage will occur if it is swapped while power is on |
Can go into slot W0 or W1 of the 1E2W, 2E2W, and 1E1R2W network modules |
Does not support the 1E2W, 2E2W, and 1E1R2W, NM-1FE2W, NM-2FE2W network modules |
Supported in NM-1FE1R2W, NM-1FE2W, NM-2FE2W, NM-1FE2W-V2, NM-2FE-2W-V2, and NM-2W |
Supported Onboard, NM-1FE2W-V2, NM-1FE1R2W, NM-2FE2W-V2 and NM-2W |
Note: The Cisco IOS Software releases provided are typically the minimum version required to support the platform, module, or feature in question. Use the Software Advisor to choose appropriate software for your network device: match software features to Cisco IOS and Cisco Catalyst® Operating System (Catalyst OS) releases, compare Cisco IOS releases, or find out which software releases support your hardware. The Software Advisor and other tools are available in TAC Tools for Access-Dial Technologies.
CISCO IOS SOFTWARE RELEASE
Platform |
Minimum Release |
Cisco 1601(R), 1602(R), and 1605-R |
Not Supported |
Cisco 1603, 1603-R, 1604 and 1604-R |
Not Supported |
Cisco 1720, 1721, 1751, 1760 |
First Supported in 12.3(10) |
Cisco 1750 |
Not Supported |
Cisco 2600 and 2600XM |
First Supported in 12.3(10) |
Cisco 3620 and 3640 |
Not Supported |
Cisco 3660 |
First Supported in 12.3(10) |
Cisco 3700 |
First Supported in 12.3(10) |
Cisco 1800 and 2800 |
First Supported in 12.3(8)T |
Cisco 3800 |
First Supported in 12.3(11)T |
Note: The Cisco IOS Software releases provided are typically the minimum version required to support the platform, module, or feature in question. Use the Software Advisor to choose appropriate software for your network device: match software features to Cisco IOS and Cisco Catalyst® Operating System (Catalyst OS) releases, compare Cisco IOS releases, or find out which software releases support your hardware. The Software Advisor and other tools are available in TAC Tools for Access-Dial Technologies.
CARRIER MODULE SUPPORTED
Platform |
Carrier Module Supported |
Cisco 1601(R), 1602(R), and 1605-R |
Not Supported |
Cisco 1603, 1603-R, 1604 and 1604-R |
Not Supported |
Cisco 1720, 1721, 1751 ,1760 |
Not Supported |
Cisco 1750 |
Not Supported |
Cisco 2600 and 2600XM |
Onboard. NM-2W |
Cisco 3620 and 3640 |
Not Supported |
Cisco 3660 |
NM-1FE2W-V2, NM-1FE1R2W, NM-2FE2W-V2 and NM-2W |
Cisco 3700 |
NM-1FE2W-V2, NM-1FE1R2W, NM-2FE2W-V2 and NM-2W |
Cisco 1800 and 2800 |
Onboard |
Cisco 3800 |
Onboard, NM-1FE2W-V2, NM-1FE1R2W, NM-2FE2W-V2 and NM-2W |
Note: The Cisco IOS Software releases provided are typically the minimum version required to support the platform, module, or feature in question. Use the Software Advisor to choose appropriate software for your network device: match software features to Cisco IOS and Cisco Catalyst® Operating System (Catalyst OS) releases, compare Cisco IOS releases, or find out which software releases support your hardware. The Software Advisor and other tools are available in TAC Tools for Access-Dial Technologies.
SPECIFICATIONS
Product Number |
Description |
WIC-1B-S/T-V3 |
1-Port ISDN WAN Interface Card (dial and leased line) |
SAFETY, EMC, TELECOM, NETWORK HOMOLOGATION, POWER REQUIREMENTS
• Cisco 2600/2600XM/2691 Series: http://www.cisco.com/en/US/products/hw/routers/ps259/products_data_sheet0900aecd800fa5be.html
• Cisco 3600 Series: http://www.cisco.com/en/US/products/hw/routers/ps274/products_data_sheets_list.html
• Cisco 3700 Series: http://www.cisco.com/en/US/products/hw/routers/ps282/products_data_sheet09186a008009203f.html
Dimensions and Weight
• Dimensions (H x W x D)
–1.55 x 7.10 x 7.2 in. 1.55 x 7.10 x 7.2 in. .75 x 3.08x 4.38 in.
• Weight
–2 lb max 2 lb max 2.4 oz
Diagnostics
• LEDs
–Network module status indicator, status LEDs for each B Channel and NT1
• Environmental conditions
–Operating temperature 32 to 104°F (0 to 40°C),
–Nonoperating temperature 13 to 158°F (-25 to 70°C)
• Relative humidity
–to 95% noncondensing
• Cabling
–RJ-45 connectors
댓글을 달아 주세요